Re: Problem with the headset button after switching off the headset by software
Update:This issue also affects Spokes 3.0 so could be in part firmware related.I will follow up with software team.Michał, let us know if the workaround is effective...Thanks,Lewis.
View ArticleRe: Problem with the headset button after switching off the headset by software
Hi Lewis,thank you for the quick answer. The temporary workaround works. The desired headset state (MonoOn) is achieved but the switching of connection state remains. So I will try to filter the...
View ArticleIMobilePresenceEvents in Spokes 2.8?
I am trying to set up basic connection to gather mobile caller ID when the mobile phone is ringing. I installed the Spokes 2.8 SDK and tried following instructions in the blog post...
View ArticleRe: IMobilePresenceEvents in Spokes 2.8?
Hi Ray, To use the IMobilePresenceEvents interface you need to inciude using Plantronics.Device.Commonusing Plantronics.UC.Common to your source file and add Plantronics.Device.Common.dll...
View ArticleRe: Problem with the headset button after switching off the headset by software
Hi Lewis, Do you have any news from the software team? I have just noticed, that the proposed workaround doesn’t work properly with D100 headset. This is due to a different sequence of events (in...
View ArticleRe: newbie question
Hi David, I know it's been a long time, but I have an update on this: A colleague in Plantronics recently pointed out that Plantronics offer a dedicated push-to-talk headset solution that is targeted...
View ArticleDid somebody connect 903+ fully with the laptop all video & audio functions...
I made it and I love BackBeat 903+ headphones,,, no regrets...Thank you Plantronics
View ArticleRe: How to install Plantronics on machine where user is not root user.
Hi Greg, My problem is it that my user exists in admin group and I am able to install this msi in UI mode but it fails in silent mode. If it is privileges error then there are two point which are not...
View ArticleRe: Querying the current volume setting, any way ?
Hi, I am sorry, but our current SDK does not support either the querying or setting of volume level. The volume level can only be set through the buttons on the device. Wei
View ArticleRe: How to install Plantronics on machine where user is not root user.
Hi Surya, The issue you raised is not specific to the Plantronics msi you are installing, but a issue with Windows security design, Just because a user is an administrator, on Windows Vista and above...
View ArticleRe: SpokesSDKComSample: "muteon" not working
Hi Julio, If you you getting events back after you type the muteon command, that meant Spokes sent the muteon command to the device and the device responded correctly with the event. If however you did...
View ArticleRe: Voyager Pro goes on "mute" on call answer
Hi Albert, The inherent design of the Voyager Pro/Legend means that a press of the "talk" button will open or close the rf/audio link between dongle and headset or between a paired mobile and headset....
View ArticleSpokes_RT installer and REST service port
Hi, we have a port conflict between PlantronicsURE and another application (both using TCP port 32001), so we are looking for a solution that installs Spokes Run-Time using a different port than...
View ArticleRe: Spokes_RT installer and REST service port
Hi Staffan, I am sorry to say that in the current Spokes implementation, the port number is not configurable, manually or otherwise. Dynamic port allocation may be considered as a future option, but...
View ArticleDeviceStateChanged event with value DeviceState_RemovePending on removing...
Hi, all. I'm experiencing strange effect with ISessionCOMManagerEvents::DeviceStateChanged event.Each time I remove BT300 from USB port of my PC I receive event with value DeviceState_RemovePending...
View ArticleRe: Spokes_RT installer and REST service port
Hi Staffan, You can choose to not install the REST component with Spokes custom install. You can also produce a custom Spokes installer MSI that omits the REST Component using Plantronics Enterprise...
View ArticleRe: Spokes_RT installer and REST service port
Hi Lewis, that is a useful program, that will help us! Thank you very much. CheersStaffan
View ArticleRe: DeviceStateChanged event with value DeviceState_RemovePending on removing...
Hi Viktor, Thanks for your question. I have taken a look inside Spokes software and there is nothing I can see that would produce a DeviceState_RemovePending.Spokes seems only concerned with and able...
View ArticleClik here to view.
Re: Re: DeviceStateChanged event with value DeviceState_RemovePending on...
Hi,Lewis. I've tried on both Lite and Full 2.8.243 Spokes SDK versions. Our integration written on Qt is based on COM C++ code example.Please find below wrapper for...
View ArticleRe: DeviceStateChanged event with value DeviceState_RemovePending on removing...
Hi again Viktor Kolesnyk Sorry for delay in replying. It is very strange. Perhaps there is something different about your Qt project when compared to the SDK C++ COM example that makes the wrong value...
View Article